News
November 28, 2024
MECS Engineering Secures Another Project by Mitsubishi Japan/USA for Dow P2Z Initiative in Edmonton, Alberta
MECS Engineering is proud to announce the addition of another project to our ongoing work with Mitsubishi Heavy Industries Compressor International Corporation (MCOI) for the Dow Path2Zero (P2Z) Project near Edmonton, Alberta.
In addition to our previous projects, this involves providing engineering services to obtain Design Registrations from the Alberta Boilers Safety Association (ABSA) for piping systems and special fittings.This expansion of our collaboration highlights MECS Engineering’s continued role in supporting the world’s first net-zero emissions ethylene cracker and derivatives site, demonstrating our commitment to excellence in engineering and sustainable innovation.
August 06, 2024
MECS Engineering to Conduct Piping Stress Analysis for Proton Solutions Inc, Ontario, Canada
MECS Engineering will provide specialized engineering services to Proton Solutions Inc. by conducting a comprehensive piping stress analysis of their steam piping system. This analysis aims to ensure the system’s integrity and compliance with safety standards, enhancing overall operational efficiency.
July 22, 2024
MECS Awarded Prestigious Project by AECOM for High-Pressure Hydraulic Line Stress Analysis in Washington, D.C., USA
July 14, 2024
MECS Awarded New Project by Mitsubishi for DOW Path to Zero Initiative in Alberta, Canada
MECS has been retained for another project by Mitsubishi Japan/USA, supporting Dow Chemical’s new net-zero facility near Edmonton, Alberta. Dow’s Fort Saskatchewan Path2Zero expansion project will establish the world’s first net-zero emissions integrated ethylene cracker and derivatives site. MECS will provide consulting services to MCO, focusing on the piping systems for multiple steam turbine and compressor skids, ensuring code compliance and obtaining CRNs (Canadian Registration Numbers) from ABSA on their behalf.
July 04, 2024
MECS Engineering to Provide Third Party Verification and Certification Services for Reactive Manufacturing Inc.’s Spreader Beam Design in Ontario, Canada
MECS Engineering will offer expert engineering services to Reactive Manufacturing Inc. by reviewing and certifying the engineering drawings related to the spreader beam. This certification will include affixing a Professional Engineer (P.Eng.) stamp to ensure compliance with industry standards and regulations.
March 20, 2024
MECS Retained by Cryonorm LLC, Netherlands to Perform Piping Stress Analysis for Steam Vaporizer Systems in Alberta, Canada
MECS has been retained by Cryonorm LLC, Netherlands to conduct piping stress analysis for multiple lines connected to a steam vaporizer, ensuring system integrity and compliance with industry standards. This includes analyzing the combined impact of all interconnected lines to ensure the overall system’s performance and safety.
March 11, 2024
MECS Engineering Moves to New Office in Scarborough, Toronto
January 20, 2024
MECS Engineering Secures Project for Piping Stress Analysis of Anti-Icing Systems with Camfil Power Systems, Quebec, Canada
MECS Engineering is excited to announce its latest collaboration with Camfil Power Systems (CPS) to perform a piping stress analysis for anti-icing systems. This project also includes the integration of the existing CAESAR II model for the piping connected to the anti-icing system. The analysis will assess the structural integrity and performance of the piping to ensure safety and compliance under operational conditions.
January 19, 2024
MECS Engineering Secures New Office in Scarborough, Toronto
December 25, 2023
MECS Engineering to Provide Finite Element Analysis (FEA) Services for Cryonorm LLC, USA at Edmonton 3H2 Plant
MECS Engineering is excited to announce that we will be providing engineering services to Cryonorm LLC for the Edmonton 3H2 Plant. This project will involve conducting Finite Element Analysis (FEA) on the tube bundle. In addition, MECS will ensure the certification of the analysis report by an APEGA-certified Professional Engineer (P.Eng.), ensuring full compliance with regulatory standards. This collaboration highlights MECS’s commitment to delivering high-quality engineering solutions for critical infrastructure projects.
November 16, 2023
MECS Awarded New Project by Mitsubishi Heavy Industries, USA to Provide Engineering Services for the SHRED Project in Alberta, Canada
MECS is proud to announce that we have been selected to provide engineering services to Mitsubishi Heavy Industries Compressor International Corporation (MCO-I) for the innovative Strathcona Hydrogenated Renewable Diesel (SHRED) Project by Imperial Oil. In this collaboration, MECS will oversee design verification, offer expert guidance, and certify the final design documentation with Canadian P.Eng. certification for MCO-I. This commitment ensures that the design work and documentation adhere to safety standards and code compliance in accordance with the Alberta Boilers Safety Association (ABSA).
October 05, 2023
MECS Engineering Secures Project to Deliver Engineering Services for Mitsubishi Heavy Industries on USGC – II in Texas, USA
MECS is excited to share that we have been selected to provide engineering services to Mitsubishi Heavy Industries for the USGC – II project. In this initiative, MECS will focus on validating design work, providing expert consultation, and certifying the final design documentation with the P.E. stamp from Professional Engineers registered with the Texas Board of Professional Engineers and Land Surveyors. This endeavor reinforces our commitment to ensuring that all project components comply with essential safety standards and regulatory requirements in Texas.
September 27, 2023
MECS Engineering to Conduct Structural Analysis for Cryonorm LLC, USA at Edmonton 3H2 Plant
MECS Engineering is pleased to announce our selection to provide engineering services to Cryonorm LLC for the Edmonton 3H2 Plant. Our scope of work will include performing a structural analysis of two piping skid frames, ensuring they meet all necessary safety and compliance standards. Additionally, MECS will certify the analysis with a Professional Engineer (P.Eng.) certified by APEGA. This project further underscores MECS’s dedication to delivering expert engineering solutions for complex industrial projects.
September 05, 2023
MECS Engineering to Assist Chrysos Corporation, Australia with Design Registration of Chiller Unit for MSA8 Timmins Project in Ontario
MECS Engineering is excited to partner with Chrysos Corporation Limited (CCL) to support their MSA8 Timmins Project. MECS will provide specialized guidance in securing the design registration of a chiller unit with the Technical Standards and Safety Authority (TSSA). Our involvement ensures that the unit meets all regulatory requirements, reflecting MECS’s expertise in facilitating compliance with Canadian safety standards.
June 07, 2023
MECS Engineering Retained by Mitsubishi Heavy Industries, USA for Design Verification and P.E Certification for La Barge Carbon Capture Project (CCP-1) in Wyoming, USA
MECS Engineering has been retained to provide engineering services to Mitsubishi Heavy Industries Compressor International Corporation (MCOI) for the La Barge Carbon Capture Project (CCP-1). These services involve verifying design work, offering expert guidance, and certifying the final design documentation with a P.E. stamp, issued by Professional Engineers registered with the Wyoming Board of Professional Engineers and Professional Land Surveyors. This project emphasizes MECS’s commitment to supporting innovative, sustainable energy initiatives while ensuring engineering excellence and compliance.
April 28, 2023
MECS Awarded Engineering Services Project with Mitsubishi for 3H2 Net-Zero Hydrogen Plant in Alberta, Canada
MECS Engineering is proud to announce its latest project with Mitsubishi Japan/USA, providing engineering services for Air Products’ new net-zero hydrogen complex, the 3H2 plant in Edmonton, Alberta. MECS will deliver consulting expertise to Mitsubishi on the piping systems for multiple steam turbines and gas seal systems, ensuring compliance with relevant codes. Additionally, MECS will handle the process of obtaining Canadian Registration Numbers (CRNs) from Alberta Boilers Safety Association (ABSA) on their behalf.
March 31, 2023
MECS Engineering to Perform Piping Stress Analysis of Ammonia Refrigeration System for Drennan Refrigeration in Ontario, Canada
MECS Engineering has been engaged by Drennan Refrigeration to conduct a piping stress analysis on their ammonia refrigeration piping system. This analysis aims to ensure the system complies with safety standards and operates efficiently. The final design report will be stamped by a Professional Engineer (P.Eng.) , Ontario.
Januart 23, 2023
MECS Engineering Awarded Project for Engineering Services for Cryonorm LLC, USA at Edmonton 3H2 Plant
MECS Engineering has been selected to provide engineering services for the Cryonorm LLC Edmonton 3H2 Plant Overall Project SOG. The primary objective is to review Cryonorm’s engineering documents related to pressure vessel design, piping design and details, structural platforms, and more, and to certify them with a P.Eng. stamp. This proposal also includes the submission of the Design Registration Package to the Alberta Boilers Safety Association (ABSA) for the Pressure Boundary section, ensuring compliance with all relevant safety regulations.
March 28, 2022
MECS Engineering Awarded Design Project for Caustic Acid Dosing System Skid by Stormtec Water Management, B.C., Canada
MECS Engineering is pleased to announce its new project with Stormtec Water Management to design the piping system for the Caustic Acid Dosing System skid. This project will involve the preparation of isometric drawings for the skid’s associated piping and fabrication details.
October 02, 2020
MECS Engineering to Undertake Structural Analysis for Greenlane Renewables Inc. for ISO Container in B.C., Canada
MECS Engineering is set to undertake a structural analysis project for Greenlane Renewables Inc., focusing on a gas processing plant housed within a 20″ ISO container. MECS will conduct an initial analysis (Phase I) based on the most restrictive code and worst-case scenario loads. Additional analysis (Phase II) will be conducted to ensure compliance with all relevant codes and standards applicable in North America and Europ
